Installing FoxLock system hardware requires precise mechanical alignment, while securing your property depends on the correct digital configuration of its biometric or keyless features. FoxLock security solutions (often featuring hybrid biometric fingerprint scanners, keypads, and smart app integration) can be installed using basic household tools. Step 1: Prep the Door and Hardware
Measure specifications: Confirm your door thickness falls between 35mm and 50mm, and check if your backset requires a 60mm or 70mm latch adjustment.
Remove old hardware: Unscrew and pull out your existing doorknob or deadbolt assembly along with its frame strike plate.
Clean the mortise: Wipe away debris from the drilled edge hole so the new mechanism rests flush against the wood. Step 2: Fit the Latch and Spindle
Orient the latch: Slide the new bolt into the edge hole ensuring the “UP” orientation marker faces upward.
Chisel if needed: If the faceplate edges do not fit neatly into the door’s existing cutout, use a small wood chisel to widen the recess.
Secure the latch: Screw the latch faceplate firmly into the door edge using the provided wood screws.
Insert the spindle: Push the square cotter bar or spindle horizontally straight through the center hub of the latch. How to Install a Smart Lock and Deadbolt | How To Anything
Leave a Reply